HEADLIGHT DIMMER SWITCH (for TMMK Made) REMOVAL


  1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B000H6HE02

      Disconnect each connector.

    2. Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.

  3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. B000IES

      Disconnect the connector.

    2. Using a screwdriver, disengage the 3 claws and remove the headlight dimmer switch assembly.