LICENSE PLATE LIGHT ASSEMBLY (for TMC, TMMR Made) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  2. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. B000ILC

      Disconnect the connector.

    2. Disengage the 2 claws and remove the license plate light assembly.

  3. REMOVE LICENSE PLATE LIGHT BULB


    1. B000HOXE02
      Text in Illustration
      *1 Protective Tape
      *a Insert into the hole

      Insert a screwdriver wrapped with protective tape into the license plate light lens hole, tilt it in the direction shown in the illustration and disengage the 2 claws to remove the license plate light lens.

    2. B000J0U

      Remove the license plate light bulb.