REAR LIGHT ASSEMBLY (for TMMK Made) DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE REAR COMBINATION LIGHT PROTECTOR


    1. B000H86

      Remove the rear combination light protector.

  2. REMOVE REAR LIGHT GASKET


    1. B000M1E

      Disengage the 2 claws and 2 guides, and remove the rear light gasket.

      Note


      • Be sure to remove any remaining old gasket from the vehicle body.

      • Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.

  3. REMOVE BACK-UP LIGHT BULB


    1. B000N1Q

      Turn the back-up light socket plug with the back-up light bulb as shown in the illustration to remove them as a unit.

    2. Remove the back-up light bulb from the back-up light socket plug.