REAR LIGHT ASSEMBLY (for TMMK Made) ON-VEHICLE INSPECTION


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. B000M38E12
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Rear Light Assembly LH)

      Disconnect the T24 rear light assembly LH connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      T24-2 (B) - T24-1 (E) Ignition switch ON and shift lever not in R Below 1 V
      Ignition switch ON and shift lever in R 11 to 14 V

      If the result is not as specified, repair or replace the wire harness or connector.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. B000M38E13
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Rear Light Assembly RH)

      Disconnect the T23 rear light assembly RH connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      T23-2 (B) - T23-1 (E) Ignition switch ON and shift lever not in R Below 1 V
      Ignition switch ON and shift lever in R 11 to 14 V

      If the result is not as specified, repair or replace the wire harness or connector.