REAR COMBINATION LIGHT ASSEMBLY (for TMC, TMMR Made) REASSEMBLY

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL REAR BUMPER UPPER SIDE RETAINER


    1. B000NGI

      Engage the claw to install the rear bumper upper side retainer as shown in the illustration.

  2. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the rear turn signal light socket.

    2. B000J1N

      Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration to install them as a unit.

  3. INSTALL REAR COMBINATION LIGHT CORD


    1. B000JMQ

      Connect the connector.

    2. Engage the clamp to install the rear combination light cord.

  4. INSTALL REAR COMBINATION LIGHT PACKING


    1. B000N3O

      Install a new rear combination light packing.