REAR COMBINATION LIGHT ASSEMBLY (for TMC, TMMR Made) REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  3. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)


    1. Remove the baggage holder net.

  4. REMOVE REAR FLOOR FINISH PLATE


    1. B000KBF

      Remove the 5 clips.

    2. B000IEE

      Disengage the 4 clips and remove the rear floor finish plate.

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. B000KW7E01
      Text in Illustration
      *1 Pin

      Push the pin and remove the No. 1 luggage compartment trim hook.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER


    1. B000MUP

      Remove the 3 clips.

    2. Disengage the fastener and remove the luggage compartment inner trim cover LH.

  7. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. B000M6U

      Disconnect each connector.

    2. Disengage the clamp.

    3. B000NI6

      Remove the 4 nuts and rear combination light assembly.