REAR COMBINATION LIGHT ASSEMBLY (for TMMK Made) REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER ASSEMBLY


    1. Remove the spare wheel cover assembly.

  3. REMOVE REAR FLOOR FINISH PLATE


    1. B000NKV

      Remove the 5 clips.

    2. B000J8C

      Disengage the 4 clips and remove the rear floor finish plate as shown in the illustration.

  4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. B000NA4E01
      Text in Illustration
      *a Pin

      Push in the pin and remove the No. 1 luggage compartment trim hook.

  5. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER


    1. B000HM4

      Remove the 2 clips.

    2. Disengage the fastener and remove the luggage compartment inner trim cover LH.

  6. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. B000NED

      Disconnect the 2 connectors.

    2. Disengage the clamp.

    3. B000HNT

      Remove the 3 nuts and rear combination light assembly.

    4. B000H2M

      Disengage the guide and remove the rear combination light assembly as shown in the illustration.