SIDE TURN SIGNAL LIGHT ASSEMBLY (for TMC, TMMR Made) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. Connect the connector.

    2. Engage the 2 claws to install the side turn signal light assembly.

  2. INSTALL OUTER MIRROR COVER (w/o Memory)


    1. Engage the 7 claws to install the outer mirror cover.

    2. Connect the 2 connectors.

    3. Engage the clamp.

    4. Install the mirror actuator with the 3 screws.

  3. INSTALL OUTER MIRROR COVER (w/ Memory)


    1. Engage the 7 claws to install the outer mirror cover.

  4. INSTALL OUTER MIRROR (w/o Memory)


    1. Connect the 2 connectors.

    2. B000KLJ

      Engage the 2 guides on the upper part of the outer mirror to the outer mirror.

    3. B000HDF

      Engage the 2 claws on the lower part of the outer mirror to the outer mirror.

  5. INSTALL OUTER MIRROR (w/ Memory)


    1. Connect the 2 connectors.

    2. Engage the 2 claws.

    3. B000MAJ

      Engage the 4 claws to install the outer mirror.