WIPER ECU REMOVAL


  1. REMOVE FRONT PANEL GARNISH


    1. B000MWG

      Disengage the 3 clips and 8 guides to remove the front panel garnish RH.

  2. REMOVE FRONT DOOR SCUFF PLATE

    Tech Tips

    Use the same procedure as for the LH side Click here.

  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for the LH side Click here.

  4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. B000J7V

      Disconnect the front door opening trim weatherstrip RH.

  5. REMOVE INSTRUMENT SIDE PANEL


    1. B000LEU

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. B000JRJ

      Disengage the 3 guides to remove the instrument side panel RH as shown in the illustration.

  6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. B000LGW

      Disengage the 4 claws.

    2. Disengage the 2 guides.

    3. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.

  7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. B000M27

      Remove the bolt <B> and screw <D>.

    2. Open the lower instrument panel door.

    3. B000NBB

      Remove the 3 screws <D>.

    4. B000ILS

      Disengage the 2 clips, 4 guides and remove the lower instrument panel sub-assembly as shown in the illustration.

  8. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY


    1. B000H9H

      Disconnect the connector.

    2. Remove the nut and windshield wiper relay assembly.