HEADLIGHT CLEANER SWITCH REMOVAL


  1. REMOVE NO. 1 SWITCH HOLE BASE


    1. B000IOWE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. Using a moulding remover, disengage the 4 claws and 2 guides as shown in the illustration.

    3. Disconnect the connector and remove the No. 1 switch hole base.

  2. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. B000I0U

      Disengage the 2 claws and remove the headlight cleaner switch assembly.