WASHER LEVEL WARNING SWITCH INSTALLATION


  1. INSTALL LEVEL WARNING SWITCH ASSEMBLY


    1. B000MML

      Install the level warning switch assembly as shown in the illustration.

    2. Connect the connector.

      Note

      Be careful when installing the level warning switch assembly. If the level warning switch assembly is dropped, replace it with a new one.

    3. B000KRJ

      Connect the washer hose to the windshield washer motor and pump assembly.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. for TMC, TMMR Made:


      1. Install the front fender liner RH with the 4 clips and 5 screws.

      2. Install 2 new grommets.

      3. B000L3QE02
        Text in Illustration
        *1 Clip
        *2 Pin Hold Clip
        *a Correct
        *b Incorrect

        Install the pin hold clip as shown in the illustration.

        Note

        Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      4. Install the clip.

    2. for TMMK Made:


      1. Install the front fender liner RH with the 4 clips.

      2. Install 3 new grommets.

      3. Install the 5 screws and bolt.

      4. B000K5XE02
        Text in Illustration
        *1 Clip
        *2 Pin Hold Clip
        *a Correct
        *b Incorrect

        Install the pin hold clip as shown in the illustration.

        Note

        Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      5. Install the clip.

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH


    1. for TMC, TMMR Made:


      1. Install the front wheel opening extension pad RH with the 3 screws.

    2. for TMMK Made:


      1. Install the front wheel opening extension pad RH with the 3 screws.

  5. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1049 kgf*cm, 76 ft.*lbf }