WASHER LEVEL WARNING SWITCH INSPECTION


  1. INSPECT LEVEL WARNING SWITCH ASSEMBLY

    Tech Tips

    The following check should be performed with the windshield washer motor and pump installed to the washer jar.


    1. Fill the washer jar with washer fluid.

    2. B000LKUE11
      Text in Illustration
      *a

      Component without harness connected

      (Level Warning Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (S) - 2 (E)

      Fluid volume is 600 to 800 cc (36.6 to 48.8 cu.in.) or higher

      *

      		 10 kΩ or higher

      Fluid volume is 600 to 800 cc (36.6 to 48.8 cu.in.) or lower

      *

      		 Below 1 Ω

      Tech Tips

      *: The level warning switch assembly begins operating when the fluid volume is 600 to 800 cc (36.6 to 48.8 cu.in.) depending on the vehicle condition.

      If the result is not as specified, replace the level warning switch assembly.