WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. for TMC, TMMR Made:


      1. B000JZM

        Remove the 3 screws and front wheel opening extension pad RH.

    2. for TMMK Made:


      1. B000LS7

        Remove the 3 screws and front wheel opening extension pad RH.

  3. REMOVE FRONT FENDER LINER RH


    1. for TMC, TMMR Made:


      1. B000KK5

        Remove the clip.

      2. B000HJXE01
        Text in Illustration
        *a 90°

        Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

      3. B000IYXE01
        Text in Illustration
        *1 Grommet

        Remove the 5 screws.

      4. Remove the 4 clips, 2 grommets and front fender liner RH.

        Tech Tips

        The grommets need to be replaced with new ones because they will break when they are removed.

    2. for TMMK Made:


      1. B000JK6

        Remove the clip.

      2. B000I9BE02
        Text in Illustration
        *a 90°

        Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

      3. B000KZOE02
        Text in Illustration
        *1 Grommet

        Remove the 5 screws and bolt.

      4. Remove the 4 clips, 3 grommets and front fender liner RH.

        Tech Tips

        The grommets need to be replaced with new ones because they will break when they are removed.

  4. DRAIN WASHER FLUID


    1. B000N27

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. B000H2A

      Disconnect the connector.

    2. Remove the level warning switch assembly as shown in the illustration.