WASHER NOZZLE INSTALLATION


  1. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. B000H1QE01

      Engage the 2 claws to install the washer nozzle sub-assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. for TMC, TMMR Made:


      1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

        Standard
        Washer fluid hits the windshield in the areas shown in the illustration.
        B000HIZE01
        Standard Clearance
        Area Measurement Area Measurement
        A 300.0 mm (11.8 in.) B 145.0 mm (5.71 in.)
        C 170.0 mm (6.69 in.) - -
        Text in Illustration
        *a Upper Limit *b Standard
        *c Lower Limit - -

        Tech Tips

        If the result is not as specified, replace the washer nozzle sub-assembly.

    2. for TMMK Made:


      1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

        Standard
        Washer fluid hits the windshield in the areas shown in the illustration.
        B000HIZE10
        Standard Clearance
        Area Measurement Area Measurement
        A 300.0 mm (11.8 in.) B 145.0 mm (5.71 in.)
        C 175.0 mm (6.89 in.) - -
        Text in Illustration
        *a Upper Limit *b Standard
        *c Lower Limit - -

        Tech Tips

        If the result is not as specified, replace the washer nozzle sub-assembly.

  3. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      B000HRZE03
      Text in Illustration
      *a Washer Fluid Spray Angle *b Part Number