WASHER NOZZLE ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. for TMC, TMMR Made:


      1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

        Standard
        Washer fluid hits the windshield in the areas shown in the illustration.
        B000HIZE01
        Standard Clearance
        Area Measurement Area Measurement
        A 300.0 mm (11.8 in.) B 145.0 mm (5.71 in.)
        C 170.0 mm (6.69 in.) - -
        Text in Illustration
        *a Upper Limit *b Standard
        *c Lower Limit - -

        Tech Tips

        If the result is not as specified, replace the washer nozzle sub-assembly.

    2. for TMMK Made:


      1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

        Standard
        Washer fluid hits the windshield in the areas shown in the illustration.
        B000HIZE10
        Standard Clearance
        Area Measurement Area Measurement
        A 300.0 mm (11.8 in.) B 145.0 mm (5.71 in.)
        C 175.0 mm (6.89 in.) - -
        Text in Illustration
        *a Upper Limit *b Standard
        *c Lower Limit - -

        Tech Tips

        If the result is not as specified, replace the washer nozzle sub-assembly.