LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.

        Light Control
        Display Default Content Setting Relevant ECU
        Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A Light2, Light1, Normal, Dark1 or Dark2 Main Body ECU (Multiplex Network Body ECU)
        Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B Light2, Light1, Normal, Dark1 or Dark2
        Response Time Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position Normal or Long
        Sensitivity Normal Adjusts the sensitivity of the automatic light control system.*C Light2, Light1, Normal, Dark1 or Dark2
        DRL Function* ON ON/OFF of the DRL function ON or OFF

        • *: for TMMK Made

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A
        Brightness level required to dim the lights B000IAP
        Setting Dark2 Dark1 Normal Light1 Light2
        *B
        Brightness level required to cancel the dimming of the lights B000IAP
        Setting Dark2 Dark1 Normal Light1 Light2
        *C
        Sensitivity of the automatic light control system B000IAP
        Setting Dark2 Dark1 Normal Light1 Light2

    2. Customizing with multi-display


      1. Turn the ignition switch to ON.

      2. Enter the following menus: MENU or APPS / Vehicle / Vehicle customization / Lights settings. (w/ Audio and Visual System)

      3. Enter the following menus: SETUP / Vehicle / Vehicle customization / Lights settings. (w/ Navigation System (for Radio and Display Type)

      4. Enter the following menus: MENU / Vehicle / Vehicle customization / Lights settings. (w/ Navigation System (for Navigation Receiver Type)

      5. Select the setting by referring to the table below.

        Vehicle settings
        Display Default Content Setting Relevant ECU
        Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Daytime running lights* On ON/OFF of the DRL function On or Off

        • *: for TMMK Made

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A
        Sensitivity of the automatic light control system B000IAP
        Setting -2 -1 0 +1 +2