OIL LEVEL SENSOR INSTALLATION


  1. INSTALL ENGINE OIL LEVEL SENSOR


    1. Install the engine oil level sensor with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Engage the clamp.

    3. Install a new clip to the engine oil level sensor.

    4. Connect the engine oil level sensor connector.

  2. INSTALL OIL PAN SUB-ASSEMBLY


    1. B000HD4E02
      Text in Illustration
      *a Seal Packing

      Apply seal packing in a continuous line as shown in the illustration.

      Seal Packing
      Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent
      Standard Seal Packing Diameter
      2.5 to 3.5 mm (0.0984 to 0.138 in.)

      Note


      • Remove any oil from the contact surface.

      • Install the oil pan sub-assembly within 3 minutes and tighten the bolts and nuts within 10 minutes of applying seal packing.

      • Do not start the engine for at least 2 hours after installation.

    2. B000N6JE03
      Text in Illustration
      *A Type A
      *B Type B
      B000K70 Bolt
      B000IB9 Nut

      Install the oil pan sub-assembly with the 11 bolts and 2 nuts in several steps, in the order shown in the illustration.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Tech Tips

      The bolt (A) and nut (A) are tightened twice.

  3. INSTALL ENGINE ASSEMBLY

    Click here