OIL PRESSURE SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. B000KZ3

      Disengage the 3 grommets to remove the No. 1 engine cover sub-assembly.

      Note

      When removing the No. 1 engine cover sub-assembly, make sure to lift it upward. Pulling the No. 1 engine cover sub-assembly towards you may damage the No. 1 engine cover sub-assembly.

  2. REMOVE NO. 2 ENGINE MOUNTING STAY RH


    1. B000H1V

      Remove the 2 bolts and No. 2 engine mounting stay RH.

  3. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY


    1. Disconnect the oil pressure sender gauge assembly connector.

    2. B000JII

      Using a 27 mm deep socket wrench, remove the oil pressure sender gauge assembly.