WATER PUMP REMOVAL


  1. DRAIN ENGINE COOLANT

    Note

    Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. B000JZIE01
      Text in Illustration
      *1 Engine Under Cover LH
      *a Hose

      Connect a hose with an inside diameter of 9 mm (0.354 in.) to the radiator drain cock as shown in the illustration.

    2. Loosen the radiator drain cock plug.

    3. B000I0KE01
      Text in Illustration
      *1 Radiator Cap Sub-assembly
      *2 Radiator Drain Cock Plug

      Remove the radiator cap sub-assembly. Then drain the engine coolant.

      Tech Tips

      Collect the engine coolant in a container and dispose of it according to the regulations in your area.

    4. Disconnect the hose from the radiator drain cock.

  2. REMOVE V-RIBBED BELT

    Click here

  3. REMOVE GENERATOR ASSEMBLY

    for 100 A, 130 A Type: Click here

    for 150 A Type: Click here

  4. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    1. B000IMS

      Remove the bolt and V-ribbed belt tensioner.

  5. REMOVE ENGINE WATER PUMP ASSEMBLY


    1. B000MTH

      Remove the 7 bolts, engine water pump and gasket.