INTAKE AIR CONTROL VALVE ACTUATOR (for TCV) REMOVAL


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)


    1. B000K4L

      Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.

      Note


      • B000KKD

        Make sure that foreign matter, such as water, oil, sand or iron particles, does not enter the gear chamber or actuator at the locations marked by the circles in the illustration.

      • B000N7F

        Do not loosen or remove the bolt and 2 nuts shown in the illustration.