CANISTER (for TMMK Made) INSPECTION


  1. CHECK CANISTER (FUEL SUCTION PLATE SUB-ASSEMBLY)


    1. Visually check the canister (fuel suction plate sub-assembly).


      1. Visually check the canister (fuel suction plate sub-assembly) for cracks or damage.

        If cracks or damage are found, replace the canister (fuel suction plate sub-assembly).

    2. Inspect the ventilation of the canister (fuel suction plate sub-assembly).


      1. B000JXPE01
        Text in Illustration
        *a Port (A)
        *b Port (B)
        *c Air

        Apply compressed air to the port (A) and check that the air flows from the port (B).

        OK
        Air flows from the port (B).
    3. Inspect the check valve.


      1. B000JW4E01
        Text in Illustration
        *a Port (A)
        *b Port (B)
        *c Air

        Close the port (A), apply compressed air to the port (B).

        OK
        Air does not flow at first. By gradually increasing the pressure, air flows when the pressure in the port reaches a certain level.
      2. B000M18E01
        Text in Illustration
        *a Port (A)
        *b Port (B)
        *c Vacuum Pump

        Using a vacuum pump, apply vacuum to the port (B) with the port (A) closed.

        OK
        The vacuum is maintained at first. By gradually increasing the vacuum, air flows and the level of vacuum is maintained after the vacuum reaches a certain level.