CANISTER INSTALLATION


  1. INSTALL CANISTER (CHARCOAL CANISTER ASSEMBLY)


    1. Install the canister (charcoal canister assembly) to the vehicle body with the 2 bolts and clip.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

    2. Connect the air line hose to the canister (charcoal canister assembly) and slide the clip to secure it.

      B000KT9E01
      Text in Illustration
      *a Purge Line Hose *b Air Line Hose
      *c 2 to 7 mm (0.0787 to 0.276 in.) *d 90°
      *e 180° *f Front
      *g Upper - -

      Tech Tips

      Engage the clip within the area shown in the illustration.

    3. Connect the purge line hose to the fuel tube and slide the clip to secure it.

      Tech Tips

      Engage the clip within the area shown in the illustration.

    4. Engage the wire harness clamp.

  2. INSTALL FUEL TANK ASSEMBLY

    Click here