FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. B000N9ME02
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Sender Gauge Assembly)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Float Level Specified Condition
      1 - 2 F 13.5 to 16.5 Ω
      Between F and E

      13.5 to 414.5 Ω

      (Gradually changes)
      E 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.