FUEL PUMP ECU INSTALLATION


  1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY


    1. Connect the fuel pump control ECU assembly connector.

    2. Install the fuel pump control ECU assembly with the 2 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. Install the 3 clips.

    2. Engage the fastener and install the luggage compartment inner trim cover LH.

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. B000MS8E01
      Text in Illustration
      *1 Pin

      Engage the 2 pins to install the 2 No. 1 luggage compartment trim hooks.

  4. INSTALL REAR FLOOR FINISH PLATE


    1. B000K2P

      Engage the 4 clips and install the rear floor finish plate.

    2. Install the 5 clips.

  5. INSTALL BAGGAGE HOLDER NET (w/ Partition Net)


    1. Install the baggage holder net.

  6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.