FUEL SENDER GAUGE ASSEMBLY (for TMC, TMMR Made) INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. B000MK3E01
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Fuel Sender Gauge Assembly)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance between the terminals 1 and 2 of connector according to the value(s) in the table below.

      Standard Resistance
      Float Level Resistance (Ω)
      F 13.5 to 16.5
      Between E and F 13.5 to 414.5 (Gradually changes)
      E 405.5 to 414.5

      If the value is not as specified, replace the fuel sender gauge assembly.