FUEL SENDER GAUGE ASSEMBLY (for TMMK Made) REMOVAL


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. B000L01E02
      Text in Illustration
      *a Tube
      *b Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the wire harness clamp as shown in the illustration.

      Note

      Do not damage the tube and wire harness.

    2. Disengage the wire harness clamp.

      Note

      Do not damage the wire harness.

    3. B000M0X

      Remove the 2 wire harness protectors from the wire harness.

      Note

      Do not damage the wire harness.

    4. B000J9E

      Disconnect the fuel sender gauge assembly connector.

    5. B000K79E01

      Push the claw (A) of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.

      Note


      • Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

      • Be careful not to bend the arm of the fuel sender gauge assembly.