FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE V-RIBBED BELT

    Click here

  2. REMOVE CRANKSHAFT PULLEY


    1. B000I91E02
      Text in Illustration
      *a Hold
      *b Turn
      *c Washers

      Using SST, hold the crankshaft pulley and loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      SST
      09213-54015   ( 09214-00030 )
      09213-70011
      09330-00021

      Tech Tips

      Insert a few washers (total thickness: approximately 5.0 mm (0.197 in.)) between SST (09213-70011) and SST (09214-00030).

    2. B000M9LE02
      Text in Illustration
      *1 Crankshaft Pulley Set Bolt
      *a Hold
      *b Turn

      Using SST and the crankshaft pulley set bolt, remove the crankshaft pulley and crankshaft pulley set bolt.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05011 )

      Tech Tips

      Apply lubricant to the threads and end of SST.

  3. REMOVE TIMING CHAIN COVER OIL SEAL


    1. B000N2CE02
      Text in Illustration
      *a Protective Tape

      Using a screwdriver, pry out the timing chain cover oil seal.

      Note

      Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.