DRIVE BELT INSTALLATION


  1. INSTALL V-RIBBED BELT


    1. B000IHWE01
      Text in Illustration
      *1 Crankshaft Pulley
      *2 V-ribbed Belt Tensioner Assembly
      *3 Generator Assembly
      *4 Engine Water Pump Assembly
      *5 Compressor Assembly with Pulley

      Set the V-ribbed belt onto each part as shown in the illustration except the engine water pump pulley.

    2. Loosen the V-ribbed belt by turning the belt tensioner clockwise.

    3. Set the V-ribbed belt onto the engine water pump pulley.

      Note

      Make sure that the V-ribbed belt is securely fitted into the grooves of each pulley.

  2. INSTALL FRONT FENDER APRON SEAL RH


    1. Install the front fender apron seal RH with the 2 bolts and clip.

  3. INSTALL ENGINE UNDER COVER RH


    1. Install the engine under cover RH with the 3 screws and 3 clips.

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH


    1. Install the front wheel opening extension pad RH with the 3 screws.

  5. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1049 kgf*cm, 76 ft.*lbf }