AIR FUEL RATIO SENSOR REMOVAL


  1. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. B000GXT

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold converter sub-assembly (TWC: Front Catalyst).

  2. REMOVE AIR FUEL RATIO SENSOR


    1. B000JO2

      Disengage the 3 wire harness clamps.

    2. B000HY2E01

      Disconnect the air fuel ratio sensor connector.

    3. Using SST, remove the air fuel ratio sensor from the exhaust manifold.

      SST
      09224-00011

      Note

      If the air fuel ratio sensor has been struck or dropped, replace it.