CAMSHAFT OIL CONTROL VALVE (for Exhaust Side) REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. B000KZ3

      Disengage the 3 grommets to remove the No. 1 engine cover sub-assembly.

      Note

      When removing the No. 1 engine cover sub-assembly, make sure to lift it upward. Pulling the No. 1 engine cover sub-assembly towards you may damage the No. 1 engine cover sub-assembly.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. B000M90

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

    3. B000KDXE02
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the camshaft timing oil control valve assembly.