SFI SYSTEM PRECAUTION


  1. INITIALIZATION

    Note


    • Perform Registration (VIN registration or frame number registration) when replacing the ECM Click here.

    • Before replacing the ECM, refer to Service Bulletin (for Immobiliser System).

    • Make sure to perform Reset Memory (AT initialization) when replacing the automatic transaxle assembly, engine assembly or ECM Click here.

    • When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

      System Name See Procedure
      Parking Assist Monitor System

      Click here

  2. WHEN USING GTS

    CAUTION:

    Observe the following items for safety reasons:


    • Before using the GTS, read the instruction manual.

    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.

    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One is for driving the vehicle, and the other operates the GTS.