CAMSHAFT POSITION SENSOR INSTALLATION

INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

1. 

   Text in Illustration

   *1

   O-ring

   Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

2. Install the camshaft position sensor with the bolt.

   Torque:

   10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   Note

   
   

   • If there is any adhesive remaining on the bolt for the camshaft position sensor, clean and degrease the threads of the bolt.

   • Make sure that the O-ring is not cracked or does not jump out of position during installation.

3. Connect the camshaft position sensor connector.

INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

1. 

   Text in Illustration

   *1

   O-ring

   Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

2. Install the camshaft position sensor with the bolt.

   Torque:

   10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   Note

   
   

   • If there is any adhesive remaining on the bolt for the camshaft position sensor, clean and degrease the threads of the bolt.

   • Make sure that the O-ring is not cracked or does not jump out of position during installation.

3. Connect the camshaft position sensor connector.

INSPECT FOR OIL LEAK