CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. B000H7U

      Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. B000HYC

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor.

  3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)


    1. B000I62

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor.