THROTTLE BODY INSPECTION


  1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY


    1. Check that the throttle valve opens and closes smoothly.

    2. Check that there is no sludge accumulated around the throttle with motor body assembly.

    3. B000JVEE10
      Text in Illustration
      *a

      Component without harness connected:

      (Throttle with Motor Body Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the throttle with motor body assembly.