| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| No. 1 transmission oil filler tube x Automatic transaxle oil pan sub-assembly | 8.0 | 8 | 7 in.*lbf | ||
| Overflow plug x Automatic transaxle oil pan sub-assembly | 40 | 408 | 30 | ||
| Refill plug x Rear transaxle cover sub-assembly | 49 | 500 | 36 | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Transmission revolution sensor x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Transmission wire lock plate x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Temperature sensor assembly lock plate x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Shift solenoid valve SL4 x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Shift solenoid valve SL3 x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Shift solenoid valve SLT x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Shift solenoid valve SL2 x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Shift solenoid valve SL x Transmission valve body assembly | 10.8 | 110 | 8 | ||
| Transmission valve body assembly x Transaxle case sub-assembly | Bolt (A), (B), (C) | 10.8 | 110 | 8 | |
| Bolt (D) | 9.6 | 98 | 85 in.*lbf | ||
| Valve body oil strainer assembly x Transmission valve body assembly | 9.6 | 98 | 85 in.*lbf | ||
| Automatic transaxle oil pan sub-assembly x Transaxle case sub-assembly | except Precoated bolt | 7.5 | 76 | 66 in.*lbf | |
| Precoated bolt | 7.0 | 71 | 62 in.*lbf | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Park/neutral position switch assembly x Transaxle case sub-assembly | 5.4 | 55 | 48 in.*lbf | ||
| Transmission control shaft lever x Manual valve lever shaft sub-assembly | 12.7 | 130 | 9 | ||
| Transmission control cable assembly x Transmission control shaft lever | 13 | 133 | 10 | ||
| Engine wire x Automatic transaxle assembly | 8.0 | 82 | 71 in.*lbf | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Shift lever support x Vehicle body | 12 | 122 | 9 | ||
| Lower shift lever assembly x Shift lever support | 12 | 122 | 9 | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Transmission control cable assembly x Vehicle body | 5.0 | 51 | 44 in.*lbf | ||
| Transmission control cable assembly x Transmission control shaft lever | 13 | 133 | 10 | ||
| Nut x Wire harness clamp bracket | 8.0 | 82 | 71 in.*lbf | ||
| No. 1 parking brake cable assembly x Vehicle body | Bolt | 15 | 153 | 11 | |
| Nut | 5.4 | 55 | 48 in.*lbf | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| No. 1 transmission oil filler tube x Automatic transaxle oil pan sub-assembly | 8.0 | 8 | 7 in.*lbf | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Harness clamp brackets x Transaxle case sub-assembly | 8.0 | 82 | 71 in.*lbf | ||
| Harness clamp brackets x Rear transaxle cover sub-assembly | 8.0 | 82 | 71 in.*lbf | ||
| No. 1 transmission control cable bracket x Transaxle case sub-assembly | 12 | 122 | 9 | ||
| Automatic transaxle assembly x Engine assembly | Bolt (A) | Bolt length: 55 mm (2.17 in.) | 64 | 653 | 47 |
| Bolt (B) | Bolt length: 50 mm (1.97 in.) | 46 | 469 | 34 | |
| Bolt (C) | Bolt length: 32 mm (1.26 in.) | 44 | 449 | 32 | |
| Bolt length: 33 mm (1.30 in.) | 43 | 438 | 32 | ||
| Front engine mounting bracket x Transaxle housing | 65 | 653 | 47 | ||
| Engine wire x Transaxle case sub-assembly | 8.0 | 82 | 71 in.*lbf | ||
| Ground cable x Transaxle case sub-assembly | 12 | 122 | 9 | ||
| Wire harness clamp bracket x Transaxle housing | 20 | 204 | 15 | ||
| Wiring harness connector x Transaxle case sub-assembly | 11.3 | 115 | 8 | ||
| Drive plate and torque converter assembly setting bolt x Torque converter assembly | 41 | 418 | 30 | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Manual detent spring sub-assembly x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||
| Pawl stopper plate x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||
| No. 1 transmission case plate x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||
| Pawl shaft clamp x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||
| Counter drive gear nut x Front planetary gear assembly | 120 | 1224 | 89 | ||
| Front oil pump assembly x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||
| Transmission housing oil separator x Transaxle case sub-assembly | 22.7 | 231 | 17 | ||
| Differential gear lube apply tube clamp x Transaxle housing | 22.7 | 231 | 17 | ||
| Transaxle housing x Transaxle case sub-assembly | except Precoated bolt | 30.6 | 312 | 23 | |
| Precoated bolt | 22.7 | 231 | 17 | ||
| Rear transaxle cover plate x Rear transaxle cover sub-assembly | 7.5 | 76 | 66 in.*lbf | ||
| Rear transaxle cover sub-assembly x Transaxle case sub-assembly | except Precoated bolt | 22.7 | 231 | 17 | |
| Precoated bolt | 16.9 | 172 | 12 | ||
| Rear transaxle cover plug x Rear transaxle cover sub-assembly | 7.4 | 75 | 65 in.*lbf | ||
| No. 2 transaxle case plug x Transaxle housing | 17 | 173 | 13 | ||
| No. 1 transaxle case plug x Transaxle case sub-assembly | 7.4 | 75 | 65 in.*lbf | ||
| Oil cooler inlet elbow x Transaxle case sub-assembly | When not using SST | 27 | 275 | 20 | |
| When using SST | 15.3 | 156 | 11 | ||
| Oil cooler union sub-assembly x Transaxle case sub-assembly | 27 | 275 | 20 | ||
| 12 | 122 | 9 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Stator shaft assembly x Front oil pump and gear body sub-assembly | 9.3 | 95 | 82 in.*lbf | ||
| Part Tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Front differential ring gear x Front differential case | 120 | 1224 | 89 | ||