TIRE AND WHEEL SYSTEM (for TMC, TMMR Made) INSPECTION


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size 4 passengers or less 5 passengers

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      215/60R16 95V 230 (2.3, 33)

      230 (2.3, 33)*1

      240 (2.4, 35)*2

      270 (2.7, 39)*3
      215/55R17 93V

      230 (2.3, 33)*1, *2

      240 (2.4, 35)*3

      		 230 (2.3, 33)

      230 (2.3, 33)*1

      260 (2.6, 38)*2

      290 (2.9, 42)*3

      *1: For driving under 160 km/h (100 mph)

      *2: For driving at 160 km/h (100 mph) to 180 km/h (112 mph)

      *3: For driving at 180 km/h (112 mph) to 210 km/h (131 mph)

    2. B000IXH

      Using a dial indicator, check the runout of the tires.

      Maximum Tire Runout
      1.4 mm (0.0551 in.)

  2. ROTATE TIRES


    1. B000IDD

      Rotate the tires as shown in the illustration.

      Text in Illustration
      B000K70 Front

  3. INSPECT AND ADJUST WHEEL BALANCE


    1. Inspect and adjust the off-the-car balance.


      1. Steel wheel:

        Maximum Wheel Imbalance
        8.0 g (0.0176 lb)
      2. B000LMAE10
        Text in Illustration
        *a 25 mm (0.984 in.)

        Others (Non-steel wheel):

        Maximum Wheel Imbalance
        8.0 g (0.0176 lb)

        Note


        • Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.

        • Do not touch the adhesive surface of the tape.

        • Adhere a sticking type balance weight to the flat surface*a shown in the illustration.

        • Push the balance weight securely with your finger to adhere it to the desired position.

        • Do not reuse balance weights.

        Tech Tips

        The inner side balance weight should be installed by clipping it to the rim.

  4. INSPECT FRONT AXLE HUB BEARING

    Click here

  5. INSPECT REAR AXLE HUB BEARING

    Click here