FRONT DRIVE SHAFT ASSEMBLY (for 6AR-FSE) INSPECTION


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. B000JPY

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. B000HAAE02
      Text in Illustration
      *A LH Side
      *B RH Side

      Check whether the drive shaft dimensions (A) are within the following specifications.

      Note

      Keep the drive shaft assembly level during inspection.

      Dimension (A)
      LH Side 587.4 mm (1.93 ft.)
      RH Side 906.6 mm (2.97 ft.)