TRANSMISSION WIRE INSTALLATION


  1. INSTALL TRANSMISSION WIRE


    1. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

    2. Coat the temperature sensor with ATF.

    3. Connect the temperature sensor and install the lock plate with the bolt to the transmission valve body assembly.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

    4. Engage the clamp.

    5. Connect the 7 shift solenoid valve connectors.

    6. Connect the transmission revolution sensor connector.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    Click here