SHIFT PADDLE SWITCH INSPECTION


  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

    B000IX1E04

    1. Measure the resistance between each terminal when the shift paddle switch (transmission shift switch assembly) is moved to each position.

      Standard Resistance
      Transmission Shift Switch LH:
      Tester Connection Switch Condition Specified Condition
      3 (ECC) - 2 (SFTD)

      Pull "-" continuously

      (Down-shift)

      		 Below 1 Ω
      Release 10 kΩ or higher
      4 (ECC1) - 2 (SFTD)

      Pull "-" continuously

      (Down-shift)

      		 Below 1 Ω
      Release 10 kΩ or higher
      Transmission Shift Switch RH:
      Tester Connection Switch Condition Specified Condition
      3 (SFTU) - 2 (ECC1)

      Pull "+" continuously

      (Up-shift)

      		 Below 1 Ω
      Release 10 kΩ or higher
      Text in Illustration
      *a

      Component without harness connected

      (transmission shift switch LH)
      *b

      Component without harness connected

      (transmission shift switch RH)

      If the resistance value are not as specified, replace the shift paddle switch (transmission shift switch assembly).