TRANSMISSION WIRE INSTALLATION


  1. INSTALL TRANSMISSION WIRE


    1. Install the transmission wire onto the transmission valve body assembly with the bolt and lock plate.

      Torque:
      11 N*m  { 110 kgf*cm, 8 ft.*lbf }

    2. Coat the temperature sensor with ATF.

    3. Connect the temperature sensor and install the lock plate with the bolt to the transmission valve body assembly.

      Torque:
      11 N*m  { 110 kgf*cm, 8 ft.*lbf }

    4. Engage the clamp and connect the transmission wire.

    5. Connect the 7 connectors of the shift solenoid valve.

    6. Connect the connector of the transmission revolution sensor.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    Click here