AUTOMATIC TRANSAXLE SYSTEM, Diagnostic DTC:U0100

DTC Code DTC Name
U0100 Lost Communication with ECM / PCM "A"

DESCRIPTION

The engine control unit and the transmission control unit are located inside the ECM. The engine control unit intercommunicates with the transmission control ECU with the Controller Area Network (CAN).

If there is a problem in this intercommunication, the ECM sets a DTC.

DTC No. DTC Detection Condition Trouble Area
U0100

  • Following conditions are met for 1.25 seconds (1 trip detection logic):


    1. Ignition switch ON

    2. Battery voltage is 10.5 V or more

    3. No intercommunication between engine control ECU and transmission control ECU

 ECM

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC U0100)


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Enter the following menus: Powertrain / Engine and ECT / DTC.

    4. Check if DTCs are output.

      Result
      Display (DTC Output) Proceed to
      U0100 A
      U0100 and other DTCs B

    B

    GO TO DTC CHART Click here

    A

    REPLACE ECM Click here