ATF TEMPERATURE SENSOR INSTALLATION


  1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY


    1. Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

    2. Coat the 4 bolts with ATF.

    3. B000KWTE11
      Text in Illustration
      *a Clamp

      Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
      Bolt length
      Bolt A
      25 mm (0.984 in.)
      Bolt B
      85 mm (3.35 in.)

    4. Connect the connector.

  2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

    Click here