CRUISE CONTROL MAIN SWITCH INSPECTION


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      B000GZ5E19
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 3 Cruise control main switch (ON-OFF button) not pushed 1 MΩ or higher
      Cruise control main switch (ON-OFF button) pushed Below 2.5 Ω
      +/RES 235 to 245 Ω
      -/SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω
      Text in Illustration
      *1 Cruise Control Switch (ON-OFF button) - -
      *a

      Component without harness connected

      (Cruise Control Main Switch)

      		 *b ON-OFF
      *c +/RES *d -/SET
      *e CANCEL - -