PRECAUTION FOR DISCONNECTING THE BATTERY CABLE
Note
When disconnecting the battery negative (-) cable, initialize the following system(s) after the cable is reconnected:
| System | See Procedure |
|---|---|
| Parking Assist Monitor System |
IGNITION SWITCH EXPRESSIONS
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine start | START | Start |
HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM
Turn the cruise control system off using the cruise control switch (ON-OFF button) when not using the cruise control system.
Be careful as the vehicle speed increases when driving downhill with the cruise control system controlling vehicle speed.
The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is controlling vehicle speed, the + (ACCEL) function operates. When the cruise control system is not controlling vehicle speed, the RES (RESUME) function operates.
While the cruise control system is controlling vehicle speed if it goes out and a warning message is displayed, turn the cruise control system off using the cruise control switch (ON-OFF button) to reset the cruise control system. After the cruise control system is reset, if the cruise control system does not turn on, or if the cruise control system stops functioning immediately after being turned on, there may be a malfunction.
Do not use the cruise control system where the road conditions are as follows:
Heavy traffic
Steep downhill roads
Roads with sharp turns
Icy or snowy roads
Slippery roads
Do not use the cruise control system while towing.