STARTER (for 1.7 kW Type) DISASSEMBLY


  1. REMOVE REPAIR SERVICE STARTER KIT


    1. B000L1K

      Remove the nut and disconnect the lead wire from the magnet switch.

    2. B000LHM

      Holding the magnet switch to the starter drive housing assembly, remove the 2 screws.

    3. Remove the magnet switch.

    4. Remove the return spring and plunger from the starter drive housing.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. B000IRF

      Remove the 2 through-bolts, and pull out the starter yoke assembly together with the starter commutator end frame assembly.

    2. B000HFZ

      Remove the starter yoke assembly from the starter commutator end frame assembly.

  3. REMOVE STARTER ARMATURE PLATE


    1. B000L93

      Remove the armature plate from the starter yoke assembly.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. B000KGS

      Using a screwdriver, pry out the starter commutator end frame cover assembly.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. B000JJWE09
      Text in Illustration
      *1 Snap Ring Pliers

      Using snap ring pliers, remove the snap ring and washer.

      Note

      Do not drop the starter armature assembly.

    2. Remove the armature from the starter commutator end frame assembly.

  6. REMOVE PLANETARY GEAR


    1. B000IYH

      Remove the 3 planetary gears from the starter drive housing assembly.