STARTER (for 1.6 kW Type) INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. Install the starter assembly with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Connect the starter connector.

    3. Install the terminal nut and cover the nut with the cap.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  2. INSTALL BATTERY

  3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

  4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

  6. INSTALL INLET AIR CLEANER ASSEMBLY

  7. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

  8. INSTALL COOL AIR INTAKE DUCT SEAL

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.