STARTER (for 1.6 kW Type) DISASSEMBLY


  1. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. B000J8M

      Remove the nut and disconnect the lead wire from the magnet starter switch assembly.

    2. B000MRX

      Remove the 2 nuts holding the magnet starter switch to the repair service starter kit.

    3. Remove the magnet starter switch.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. B000MZH

      Remove the 2 through-bolts, and pull out the starter yoke assembly together with the starter commutator end frame assembly.

    2. B000HAZ

      Remove the starter yoke assembly from the starter commutator end frame assembly.

  3. REMOVE STARTER ARMATURE PLATE


    1. B000LGM

      Remove the starter armature plate from the starter yoke.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. B000JC4

      Using a screwdriver, pry out the starter commutator end frame cover to remove it.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. B000MODE04
      Text in Illustration
      *1 Snap Ring Pliers

      Using snap ring pliers, remove the snap ring and washer.

    2. Remove the starter armature assembly from the starter commutator end frame cover.

      Note

      Do not drop the starter armature.

  6. REMOVE RUBBER SEAL


    1. B000GYR

      Remove the rubber seal from the repair service starter kit.

  7. REMOVE PLANETARY GEAR


    1. B000IJZ

      Remove the 3 planetary gears from the repair service starter kit.