REAR STABILIZER BAR (for TMMK Made) REMOVAL


  1. REMOVE REAR WHEELS

  2. REMOVE NO. 2 FLOOR UNDER COVER


    1. B000LIZ

      Remove the 2 bolts, screw and 2 clips.

      Text in Illustration
      B000K70 Bolt
      B000IB9 Screw
      B000JQI Nut (attached to under cover)

    2. Disengage the 3 nuts and remove the No. 2 floor under cover.

  3. REMOVE NO. 1 FLOOR UNDER COVER


    1. B000KYG

      Remove the 2 bolts and screw.

      Text in Illustration
      B000K70 Bolt
      B000IB9 Screw
      B000JQI Nut (attached to under cover)

    2. Disengage the 3 nuts and 2 clips, and remove the No. 1 floor under cover.

  4. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    1. B000MAP

      Remove the nut and separate the rear stabilizer link assembly LH from the rear shock absorber assembly.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

    2. B000JLC

      Remove the nut and rear stabilizer link assembly LH from the rear stabilizer bar.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

  5. REMOVE REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  6. REMOVE REAR STABILIZER BAR


    1. B000JQJ

      Remove the 4 nuts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets, 2 rear No. 2 stabilizer bar brackets and 2 rear stabilizer bushings from the rear suspension member sub-assembly.

  7. REMOVE REAR NO. 2 STABILIZER BAR BRACKET


    1. Remove the 2 rear No. 2 stabilizer bar brackets from the rear stabilizer bar.

  8. REMOVE REAR NO. 1 STABILIZER BAR BRACKET


    1. Remove the 2 rear No. 1 stabilizer bar brackets from the rear stabilizer bar.

  9. REMOVE REAR STABILIZER BUSHING


    1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.