BLACK OUT TAPE(for Rear Door) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REPAIR INSTRUCTION

    Click here

  2. INSTALL NO. 2 BLACK OUT TAPE (for Hatchback, Wagon)


    1. for Hatchback:


      1. A012HYWC03
        *A for LH Side
        *B for RH Side
        *a Straight Line
        *b Triangle
        *c Perforation
        *d Remove

        Remove the portion of the No. 2 black out tape at the perforation as shown in the illustration.

    2. for Wagon:


      1. A012HNPC01
        *A for LH Side
        *B for RH Side
        *a Straight Line
        *b Triangle
        *c Perforation
        *d Remove

        Remove the portion of the No. 2 black out tape at the perforation as shown in the illustration.

    3. Refer to the illustration to position a new No. 2 black out tape.

      A012KC4E01
      Standard Measurement
      Dimension Measurement
      A 2.0 to 4.0 mm (0.0787 to 0.157 in.)
      B 5.0 mm (0.197 in.)
      C 5.0 mm (0.197 in.)
      D 2.0 to 4.0 mm (0.0787 to 0.157 in.)

    4. Remove the release paper and apply the No. 2 black out tape.

  3. INSTALL NO. 2 BLACK OUT TAPE (for Sedan)


    1. Refer to the illustration to position a new No. 2 black out tape.

      A012GB1C01
      *A for LH Side *B for RH Side
      *a Straight Line *b Triangle
      Standard Measurement
      Dimension Measurement
      A 2.0 to 4.0 mm (0.0787 to 0.157 in.)
      B 5.0 mm (0.197 in.)
      C 2.0 to 4.0 mm (0.0787 to 0.157 in.)
      D 5.0 mm (0.197 in.)
      E 4.0 mm (0.157 in.)

    2. Remove the release paper and apply the No. 2 black out tape.

  4. INSTALL REAR DOOR FRONT WINDOW FRAME MOULDING

    Click here