BLACK OUT TAPE(for Front Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT DOOR REAR WINDOW FRAME MOULDING

    Click here

  2. REMOVE FRONT DOOR GLASS RUN

    Click here

  3. REMOVE NO. 1 BLACK OUT TAPE


    1. Using a heat light, heat the vehicle body and No. 1 black out tape.

      Heating Temperature
      Item Temperature
      Vehicle Body and No. 1 Black Out Tape 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body or No. 1 black out tape excessively.

    2. A00YB73

      Pull back on one of the ends of the No. 1 black out tape to remove it.

      Tech Tips

      When pulling on the black out tape, pull it parallel to the body.